# FRP Anti-slip Surface Notes

![FRP anti-slip surface notes for wet walkway and car wash applications](https://qymetaltech.com/wp-content/uploads/2026/05/car-wash-frp-grating-3.webp) 





Technical resource

Compare concave, gritted and covered-top   
FRP grating surfaces for wet, oily,   
washdown and pedestrian areas.



Anti-slip surfaceWet walkwayCar wash floor

 

 

 **Check before choosing**

- Wet, oily or dry area
- Pedestrian or wheel traffic
- Cleaning frequency
- Drainage and walking comfort

 

 













FRP anti-slip review

## Choose surface by water, traffic and cleaning method

FRP grating surface should be selected by real walking conditions: dry or wet access, oily or soapy washdown, barefoot contact, pedestrian or wheel traffic, drainage needs and cleaning frequency. Use this page to decide whether concave, gritted or covered-top FRP surface should be discussed before quotation.



 [Send Surface Requirements](https://qymetaltech.com/contact/#rfq) [Download FRP RFQ Checklist PDF (PDF · English · 2 KB)](https://qymetaltech.com/wp-content/uploads/2026/05/QY-Metal-Tech-FRP-Grating-Selection-RFQ-Checklist.pdf) 

 



 **Confirm before surface review**

- Wet, oily, soapy, dry or outdoor walking condition
- Pedestrian only, carts, narrow wheels or maintenance traffic
- Cleaning frequency, dirt build-up and drainage requirement
- Comfort needs such as barefoot areas, stairs or long walkways
 
 

 



## FRP surface direction by application

This matrix is a pre-selection guide for RFQ discussion. Final choice should also consider resin, panel thickness, mesh size, span, load and local safety requirements.



 

| Dry maintenance walkway | Concave molded FRP surface is often a practical starting point when drainage, easy cleaning and general walking comfort are important.*Typical pages: [molded FRP grating](https://qymetaltech.com/molded-frp-grating/), [FRP selection guide](https://qymetaltech.com/resources/frp-grating-selection-guide/).* |
|---|---|
| Wet walkway or drainage floor | Concave or gritted surface can be reviewed depending on water volume, walking route, slope, cleaning method and whether the area remains wet for long periods.*Send photos or drawings when the area has standing water or frequent washdown.* |
| Oily, soapy or car wash bay | Gritted surface or project-specific anti-slip review is usually discussed for detergent, oil, frequent cleaning and vehicle wash areas.*Cleaning method matters because aggressive grit can hold dirt in some applications.* |
| Trench cover and narrow wheels | Covered-top FRP or closer mesh may be reviewed when small items, trolley wheels, narrow casters or a more closed walking surface are required.*Confirm drainage, weight, support span and whether removable covers are needed.* |
| Stairs, ramps or public access | Review surface grip together with nosing, panel fixing, edge protection and contrast marking. Local pedestrian safety requirements may affect the final choice.*Send stair tread size, fixing detail and expected user traffic.* |

 

 



## Anti-slip RFQ checklist





 **Walking condition**Describe how people use the area and what makes it slippery.

- Dry, wet, oily, soapy or outdoor exposure
- Barefoot, work boots, carts or narrow wheels
- Stairs, ramps, flat floors or trench covers
 
 



 **Panel and load data**Surface choice should be reviewed with the FRP panel structure.

- Thickness such as 25, 30, 38 or 50 mm
- Mesh size, span, support direction and load
- Cutouts, removable covers, clips or edge bands
 
 



 **Cleaning and maintenance**The highest-friction surface is not always the easiest to maintain.

- Cleaning tools, detergents and frequency
- Dirt, mud, chemical residue or grease build-up
- Drainage expectation and water flow direction
 
 

 



Note: anti-slip notes on this page are for RFQ preparation. For regulated access areas, confirm the required slip-resistance standard, test method or local safety requirement before quotation.

 



## Project-style anti-slip references

These examples show the type of site condition that should be included when asking for surface review.



 

 ![Car wash FRP grating floor with wet anti-slip surface](https://qymetaltech.com/wp-content/uploads/qymt-img-20261017/qymt-car-wash-frp-grating-02.webp) 

Car wash floor with detergent and frequent washdown

 

 

 ![Molded FRP grating walkway surface for pedestrian access](https://qymetaltech.com/wp-content/uploads/2026/05/qymt-molded-frp-grating-gallery-01.webp) 

Molded FRP walkway surface for pedestrian access

 

 

 ![FRP trench cover surface for drainage and wheel traffic review](https://qymetaltech.com/wp-content/uploads/2026/05/qymt-frp-trench-covers-gallery-03.jpg) 

Drainage trench cover and narrow wheel review

 

 

 



## Continue FRP selection



 [**FRP Selection Guide**Choose application, thickness, mesh, span, resin and surface together.](https://qymetaltech.com/resources/frp-grating-selection-guide/) [**Resin & Corrosion Notes**Review resin direction for wet, chemical, marine and outdoor exposure.](https://qymetaltech.com/resources/frp-resin-corrosion-notes/) [**FRP Panel RFQ Checklist**Prepare drawings, panel size, surface, resin, quantity and packing.](https://qymetaltech.com/resources/frp-panel-rfq-checklist/) 

 

 

 









Product and RFQ path

## Use this guide to move into the right product page

Use the FRP selection guide to continue into molded grating, trench cover or RFQ pages with resin, thickness and environment details ready.

 



 [**Molded FRP Grating**Confirm thickness, mesh size, resin and surface.](https://qymetaltech.com/molded-frp-grating/)[**FRP Trench Covers**Use for drainage channels and corrosive trench areas.](https://qymetaltech.com/frp-trench-covers/)[**FRP Grating Products**Return to the FRP product family.](https://qymetaltech.com/products/#frp-grating-fiberglass-flooring)[**Send Project RFQ**Send resin, span, load and drawings.](https://qymetaltech.com/contact/#rfq)

Source: https://qymetaltech.com/resources/frp-anti-slip-surface-notes/