# Custom-Shaped Steel Grating

![Custom-Shaped Steel Grating product photo for project quotation](https://qymetaltech.com/wp-content/uploads/2026/05/qymt-custom-shaped-steel-grating-gallery-01.jpg)









Steel Grating

Custom-shaped steel grating is fabricated when standard rectangular panels cannot fit columns, tanks, equipment bases or site openings. Quotation depends on drawing dimensions, bearing direction, cutouts, edge treatment and panel marks.





**Drawing basis**



**Openings and notches**



**Bearing direction**



**Edge and fixing**



**Panel marks**





[Send RFQ](https://qymetaltech.com/custom-shaped-steel-grating/#rfq)[Chat on WhatsApp](https://wa.me/8615152256390)



 **Email** sales@qymetaltech.com  
 **Files** PDF, DWG, DXF, sketches and product photos are welcome. 















Buyer overview

## Custom-Shaped Grating Is Quoted from Drawings, Openings and Panel Marks

Define the panel shape, opening sizes, load-bearing direction, support position, material, finish, fixing method and packing sequence before production.

QY Metal Tech reviews drawings, marked photos, specifications, quantity and export packing notes so each panel can match the installation area, not only the product name.







### Drawing basis

CAD/PDF drawings, sketches or marked photos should show overall outline and reference dimensions.





### Openings and notches

Pipe holes, equipment openings and access notches need size, center position and edge treatment.





### Bearing direction

Bearing bars must run across supports; mark the load direction clearly on each drawing.





### Edge and fixing

Banding, toe plate, frames, clips, bolt holes or welded lugs should be listed before fabrication.





### Panel marks

Panel numbers help match drawings, bundle labels, installation sequence and site sorting.













Specification options

## Custom-Shaped Grating Details to Confirm Before Quotation

Confirm the shape, opening position, base grating specification and edge treatment before quotation; the photos below show typical drawing-based details.







### Panel outline and curves

Irregular outlines, round edges and angled ends should be dimensioned from drawings or marked photos.







![Custom-Shaped Steel Grating - Openings and notches](https://qymetaltech.com/wp-content/uploads/qymetaltech/qymt-custom-shaped-card-ring.webp)

### Openings and notches

Pipe openings, tank cutouts and equipment clearances need exact size and position.







![Custom-Shaped Steel Grating - Bearing direction and edges](https://qymetaltech.com/wp-content/uploads/qymetaltech/qymt-custom-shaped-card-fitup.webp)

### Bearing direction and edges

Load-bearing direction, edge banding, toe plate and fixing points should be reviewed together.

















## Drawing and Fabrication Reference

| Drawing file | PDF, DWG, DXF, sketch or marked photo can be used when dimensions are clear. |
|---|---|
| Panel outline | Overall size, curve radius, angled ends and special edges should be marked. |
| Openings | Round holes, rectangular cutouts and notches need size, center position and tolerance notes. |
| Bearing direction | Bearing bars should run correctly across supports and match the installation drawing. |
| Edge treatment | Banding, toe plates, frames, clips, bolt holes or lifting points should be listed. |
| Panel marks | Panel numbers and bundle sequence help packing, installation and site sorting. |





Design notes

## Send the Details That Decide Fit, Fabrication and Installation

For custom-shaped panels, a reliable quote needs the outline dimensions, opening centers, support direction, base grating specification and panel marks.

For replacement projects, marked photos and old panel measurements can help when CAD drawings are not available.









Standards reference

## Standards and Finish References for Custom Panels

- Base grating can be reviewed by drawings, load span and standards such as YB/T 4001.1, ANSI/NAAMM MBG 531 or BS 4592 when required.
- Cutouts, curves, banding, toe plates, frames and fixing clips should be confirmed on approved drawings before fabrication.
- Hot-dip galvanizing, painting or other finish should be selected after confirming whether all openings and edge treatments are complete.
- Final inspection should follow panel marks, opening position, bearing direction, finish requirement and packing sequence.





Specification examples

## Common Custom-Shaped Grating RFQ Expressions

| P-01 opening panel | Drawing-marked panel with round opening, bearing direction and edge banding confirmed. |
|---|---|
| Curved edge panel | Arc or angled outline reviewed by dimensions, support line and finish requirement. |
| Pipe notch panel | Pipe holes or equipment notches supplied with center position, size and edge treatment. |
| Marked panel set | Panel numbers and bundle sequence arranged by installation area or drawing sheet. |

Use drawing marks as RFQ shorthand, then confirm final dimensions, opening position, material, finish and packing before production.











Applications

## Where Custom-Shaped Steel Grating Is Used





![Custom-Shaped Steel Grating - Equipment platforms](https://qymetaltech.com/wp-content/uploads/qymt-img-20261017/qymt-custom-shaped-steel-grating-07.webp)

### Equipment platforms

Panels around tanks, columns, pipes, machines and maintenance openings.







![Custom-Shaped Steel Grating - Replacement fit-up](https://qymetaltech.com/wp-content/uploads/qymt-img-20261017/qymt-custom-shaped-steel-grating-08.webp)

### Replacement fit-up

Panels copied from old drawings, site photos or measured openings when the original layout must be matched.







![Custom-Shaped Steel Grating - Project panel packages](https://qymetaltech.com/wp-content/uploads/qymetaltech/qymt-custom-shaped-card-cutouts.webp)

### Project panel packages

Different shapes can be labeled and packed by drawing mark, floor area or installation sequence.

















RFQ checklist

## Send Drawing, Opening and Panel Mark Details

Include drawings or marked photos, overall size, opening position, bearing direction, base grating spec, finish, quantity and destination. Panel marks make custom-shaped grating easier to quote and pack correctly.



[Send RFQ](https://qymetaltech.com/custom-shaped-steel-grating/#rfq)[Back to Products](https://qymetaltech.com/products/)





### Custom-Shaped Steel Grating RFQ checklist

- CAD/PDF drawing, sketch or marked photo
- Overall size, opening position, bearing direction and support span
- Base grating specification, edge banding, fixing clips or toe plate
- Material, finish, quantity and panel marks
- Packing sequence, destination port and delivery notes.













Project notes

## Confirm Drawings, Finish and Packing Before Production

For project supply, custom-shaped steel grating should be checked against approved drawings, support layout, opening dimensions and export packing sequence before fabrication.

Clear panel marks, edge treatment, fixing accessories and finish requirements reduce revision time and make the quotation easier to compare.





## Factory review checklist

- CAD/PDF drawing, sketch or marked photo
- Overall size, opening position, bearing direction and support span
- Base grating specification, edge banding, fixing clips or toe plate
- Material, finish, quantity and panel marks
- Packing sequence, destination port and delivery notes.













FAQ

## Common custom-shaped steel grating questions



Can grating be made in irregular shapes?

Yes. Curved edges, angled ends, pipe openings, notches and special outlines can be made from your drawing or a marked photo.



Which drawing formats can I send?

PDF, DWG, DXF, marked sketches or clear photos with dimensions.



What should be marked around openings?

Opening size, center position, distance to the panel edges, support direction and whether the opening needs banding or a frame.



How are cut edges finished?

Cut edges can be banded, and toe plates, frames, clips, bolt holes or lifting points added as shown on your drawing.



Is custom-shaped grating galvanized after cutting?

Yes. All cutouts, banding and fixing details are completed and checked before hot-dip galvanizing.



How do I know which panel goes where?

Each panel carries a mark that matches your drawing, and bundles are packed by drawing sheet, floor area or installation sequence.







Related paths

### Continue from this product



[Steel Bar Grating](https://qymetaltech.com/steel-bar-grating/)[Platform Steel Grating](https://qymetaltech.com/industrial-platform-grating/)[Stair Treads](https://qymetaltech.com/stair-treads/)[Steel Grating Load Table](https://qymetaltech.com/resources/steel-grating-load-table/)[Galvanized Steel Grating](https://qymetaltech.com/galvanized-steel-grating/)[How to Choose Steel Grating](https://qymetaltech.com/resources/how-to-choose-steel-grating/) 





### Need a practical custom-shaped steel grating quotation?

Include drawing files, opening sizes, bearing direction, edge treatment, material, finish, quantity, destination and panel marks. We will review the details before quotation.



[Send RFQ](https://qymetaltech.com/custom-shaped-steel-grating/#rfq)











Custom grating RFQ

## Quote custom-shaped steel grating from a marked drawing

For irregular panels, the drawing should identify the finished outline, bearing direction, openings and support edges before fabrication is priced.

- **Finished geometry**Overall dimensions, radius, angle, cutouts and reference datums.
- **Load direction**Bearing bar direction, support span, bar size, spacing and edge support.
- **Fabrication scope**Banding, toe plates, clips, finish, quantity, packing and destination.



[Platform grating](https://qymetaltech.com/industrial-platform-grating/)[Weight chart](https://qymetaltech.com/resources/steel-grating-weight-chart/)[Send marked drawing](https://qymetaltech.com/contact/#rfq)







Selection path

## Specification, data and project references





### 1 · Check technical data

- [How to choose steel grating](https://qymetaltech.com/resources/how-to-choose-steel-grating/)
- [Steel grating load table](https://qymetaltech.com/resources/steel-grating-load-table/)
- [Steel grating weight calculator and chart](https://qymetaltech.com/resources/steel-grating-weight-chart/)





### 2 · See project references

- [Factory walkway project](https://qymetaltech.com/projects/#industrial-access)
- [Industrial park drain covers](https://qymetaltech.com/projects/#drainage-covers)
- [All project references](https://qymetaltech.com/projects/)





### 3 · Datasheet and quotation

- [Download the product datasheet (PDF) (PDF · English · 432 KB)](https://qymetaltech.com/wp-content/uploads/qymt-datasheets/qymt-custom-shaped-steel-grating-datasheet.pdf)
- [Send drawings for a quotation](https://qymetaltech.com/custom-shaped-steel-grating/#rfq)













### Order terms

- MOQ: 50 pcs (panels, rolls or pieces)
- Samples available; sample and freight costs paid by the buyer
- Payment: 30% deposit, 70% before shipment
- Lead time: usually 30 days ex-works after deposit and drawing approval
- Quotation in 24–48 hours on working days
- Drawings: PDF, DWG, DXF, JPG, PNG, WebP up to 12 MB













Product datasheet

Custom-Shaped Steel Grating datasheet

2-page PDF: typical specifications, what we confirm before quotation, RFQ checklist and contact details. (432 KB)



[Download PDF (PDF · English · 432 KB)](https://qymetaltech.com/wp-content/uploads/qymt-datasheets/qymt-custom-shaped-steel-grating-datasheet.pdf)











RFQ form

## Request Custom-Shaped Steel Grating quotation

Upload drawings or marked photos if available. Include panel outline, opening sizes, bearing direction, edge banding, finish, quantity, destination and installation notes for a faster technical response.





**Drawings or marked photos**PDF, DWG, DXF, sketches and site photos help confirm the real panel shape.



**Openings and edge details**Mark hole sizes, center positions, notches, banding, toe plates and fixing points.



**Packing by panel mark**Panel numbers, bundle groups and installation sequence can follow the drawing.







 











Related links

## Related product and RFQ resources

- [Steel grating product catalog](https://qymetaltech.com/products/#steel-grating-metal-flooring)Browse the related product family section.
- [Steel grating topic entry](https://qymetaltech.com/steel-bar-grating/)Steel grating family page for platform grating, stair treads, drain covers, serrated grating, galvanized grating and drawing-based RFQs.
- [19-W-4 steel grating](https://qymetaltech.com/19-w-4-steel-grating/)Compare material, bar spacing and project specification details.
- [Carbon steel bar grating](https://qymetaltech.com/carbon-steel-bar-grating/)Compare material, bar spacing and project specification details.
- [Steel Grating RFQ Checklist for International Buyers](https://qymetaltech.com/steel-grating-rfq-checklist-international-buyers/)RFQ checklist for steel grating buyers covering application, panel or opening size, bearing bar direction, support span, finish, quantity, packing, destination and drawings.
- [FRP Grating vs Galvanized Steel Grating for Wet Areas](https://qymetaltech.com/frp-grating-vs-galvanized-steel-grating-wet-areas/)Comparison guide for wet or corrosive area grating selection, covering FRP grating and galvanized steel grating by environment, traffic, support, cutouts and quotation details.
- [How to Choose Steel Grating for Industrial Platforms](https://qymetaltech.com/how-to-choose-steel-grating-industrial-platforms/)Industrial platform grating selection guide covering platform use, support span, bearing direction, panel layout, finish, cutouts, fixing clips, drawings and RFQ details.
- [Send project RFQ details](https://qymetaltech.com/contact/#rfq)Send drawings, dimensions, finish notes, quantity and destination for review.





 

## Factory verification and order terms





### Video factory visits by appointment

Video factory visits can be arranged in advance. Contact our sales team to agree a time, platform and accessible production, inspection or packing areas. Other customers’ information and confidential areas are not shown.





### Lead time: usually 30 days ex-works

For regular orders, production usually takes 30 days ex-works, counted from receipt of the deposit and approval of the drawings. Larger or special orders, and stock availability, are confirmed in the written quotation. Production and transport times are stated separately in the quotation or contract.





### Written quotation and delivery terms

Trade terms are agreed for each order and logistics arrangement. The written quotation specifies the applicable Incoterms® 2020 rule, named delivery place or port of shipment, and whether freight, insurance and taxes are included. For containers handed to a carrier before vessel loading, FCA is considered rather than automatically using FOB.





### Quality concerns and corrective action

Please provide the order number, affected quantity, photos or video, and relevant measurements or inspection records when reporting a quality concern. If responsibility is confirmed to lie with us, a remedy such as repair, additional supply, replacement, refund or price adjustment is agreed under the contract. Costs and the action plan are confirmed in writing; no unconditional return or fixed resolution period is promised.





[Check our company registration details](https://qymetaltech.com/about/#verify-qy-metal-tech)

Source: https://qymetaltech.com/custom-shaped-steel-grating/